Pillard Control System
![Product Burner Management Control-System 500x277[1]-FIVES](https://dk8mx37zdr9bp.cloudfront.net/cement-minerals/Products/pillard_range/Product_Burner_Management_Control-System_500x277%5B1%5D.png)
Pillard Control System is a burner control cabinet designed with fail-safe Programmable Logic Controller (PLC)
Markets/applications
Pillard Control System is designed for multi-burners boilers in front firing or for Heat Recovery Steam Generators (TEG and/or FRESH AIR modes), for rotary kilns firing equipment and hot gas generators.
Pillard Control System fits with all combustion applications when risk analysis concludes that critical loops safety level are greater than or equal to Safety Integrity Level (SIL 2).
Easy-to-maintain software application
Pillard Control System is based on a structured program application.
The development relies on a certified and proven software package, which leads to a simple and easily maintainable software.
Run-safe solution
Pillard Control System leads to the adequate design of the fail-safe system.
To meet the objectives of "reliability" set by the technical specification, Pillard Control System design is based on the "Run-Safe" concept. This concept permits to control the safety criterion and the availability simultaneously, which is a crucial element, in particular in cogeneration units.
Sturdy Hardware
On the hardware side, the selected Fail-safe PLC of Pillard Control System offers natively a redundant capability that is certified TuV. Pillard Control System’s hardware offers an unrivalled robustness and a high level of safety even in degraded mode, which is a key element for the operating staff.
References
Fujairah I and II , Dalkia International, CFE Salamanca, Total Petrochemicals, Michelin
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here